Toll Free Any Time: 1-877-685-6270, x-8 or TEXT to 863-269-0786

    • Sale!

      Barefoot International B200-IS (B200 inside section) is the top piece shown in the image below but without the boom clamp attached. The Barefoot International B200-IS (B200 inside section) does not come with our Boom Clamp or the outside section with cables. Make sure it fits by providing your boat year, make, and model to my […]

    • Sale!

      The Barefoot International W2900-lower section only of Fly High w2900 is the bottom half only. The W2900 is still the only high-quality stainless steel pylon on the market made to fit 2½” pylons. It splits into two pieces for easy storage in a ski locker or bow of your boat. It’s the only extended pylon […]

    • Sale!

      The Barefoot International B202-XTI Deluxe Malibu XTi B110 combo is meant for any Malibu XTi and is meant to be used on the Passenger side only. I have included the B110 boom extension because it is almost impossible to get out of the chine spray coming off the side of the boat without it. The […]

    • Sale!

      W025-750-AVO 2016/2017 Axis Rear PNP Fat Sac Fits — T22, T23, A20, A22, A24 — Fittings Included — 750 lbs.

    • Sale!

      The Barefoot International POGO pin push-pin-sub is the small pop-up pin that works to lock in the outside end of the boom with the cables inside the male side of either the first section or a B110 boom extension. I do not have a picture or any information as to how this is to be installed. If you could provide me some pictures or a brief tutorial, I would love to include it and give you credit. to help our community.

    • Sale!

      The Barefoot International W2900-upper-sub of Fly High w2900 is everything that comes with the Fly High W2900 except the bottom half. The W2900 is still the only high-quality stainless steel pylon on the market made to fit 2½” pylons. It splits into two pieces for easy storage in a ski locker or bow of your […]

    • Sale!

      The W038-1 1/8 Axis Wake Plug & Play Rear Sac 400lbs MALIBU AXIS WAKE PLUG AND PLAY REAR SAC 400 LBS. FITS the following boats; 2014 Axis T22 2015 Axis T22 2015 Axis T23 2014 Axis A24 2015 Axis A24 2013 Axis A20 2014 Axis A20 2015 Axis A20 2013 Axis A22 2014 Axis A22 […]

    • Sale!

      This B204V Driver Side Vdrive Boom 2 Boom Extensions Height Adjuster Kids Handle is meant for a Vdrive boat with a rear pylon that sticks up in front of the engine and behind the rear seat. This particular boom is meant to go out the DRIVER’s side, but you can also choose to get the […]

    • Sale!

      remainder for half day with Lane “Dawg” Bowers personal lesson.
      God bless you and Expect a Miracle!

    • Sale!

      So you have a great mid-engine direct-drive open bow you love, it is paid for, it is great except for the fact that you want a bigger wake and you are trying with all your might not to get sucked into buying a $150k new boat that can increase the wake size with the simple flip of a switch. You really would just like a Big Wake Easy Button! Enter Fly High Retro Inboard Rear and Front Wake Kit.

      Your awesome boat plus the Fly High Retro Inboard Rear and Front Wake Kit is the perfect solution for your mid-engine direct-drive open bow to create a massive wake that will make you the go-to guy on the lake! This Retro rear wake kit adds a whopping 1100lbs to your boat with everything you need to be a completely automated wave machine.

      This kit includes:

      • 1,100 pounds total
      • Fits all boats and models that are INBOARDS before 2010
      • All ballast, fittings, and pumps included to fully integrate KIT

      2002 – 2003 – 2004 – 2005 – 2006 – 2007 – 2008 – 2009 – 2010

    • Sale!

      So you have a great mid-engine direct drive you love, it is paid for, it is great except for the fact that you want a bigger wake and you are trying with all your might not to get sucked into buying a $150k new boat that can increase the wake size with the simple flip of a switch. You really would just like a Big Wake Easy Button! Enter Fly High Retro Inboard Rear Wake Kit.

      Your awesome boat plus the Fly High Retro Inboard Rear Wake Kit is the perfect solution for your mid-engine direct drive to create a massive wake that will make you the go-to guy on the lake! This Retro rear wake kit adds a whopping 800lbs to your boat with everything you need to be a completely automated wave machine.
      This kit includes:
      • 800 pounds total
      • Fits all boats and models that are INBOARDS before 2010
      • All ballast, fittings, and pumps included to fully integrate KIT

      2002 – 2003 – 2004 – 2005 – 2006 – 2007 – 2008 – 2009 – 2010

    • Sale!

      Fly High FATSAC Fat Weight 50lb Solid Ballast Bag

      Fly High FATSAC Solid Ballast Bag

      NOTE: THE PRICE OF SHIPPING IS INCLUDED IN THE PRICE. THE PRICE FOR THIS PRODUCT IS ON SALE FOR $79.99

      • 50 Pound Bags
      • Marine Quality, UV Resistant Fabric
      • Double Stitched Seams
      • Welded FATSAC Internal Liner (extra strength & no rust)
      • Seatbelt Quality Handle Material
      • Convenient Shape for Easy Stack-AbilityTweak
    • Sale!

      Fly High Flip Surf Wakeshaper is designed to add a massive curl onto the wave of your mid-engine direct drives and Vdrives. Are you frustrated because you cannot throw the handle when you surf? Are you deceived into thinking that you need to invest in a $150k surf boat instead of a few fatsacs and a wakeshaper? Well, relax and get ready to unleash a wave that will make any ocean surfer jealous!

    • Sale!

      The Barefoot International 70101 1.5 inch quick release pin is a 1.5-inch replacement pin for the Barefoot International Tower Boom which works with all Barefoot International Tower Boom clamps except for the Tower Boom main clamp. NOTE: the product picture is NOT the actual Barefoot International 70101 1.5 inch quick release pin “The boom is […]

    • Sale!

      The Barefoot International B113-2 Quick Release Boom Pin 70102 is a 2-inch replacement pin for the Barefoot International B107 Height Adjuster which works with all Barefoot International Booms except for the Tower Boom or the Gunnel Mount Boom. It locks into place and will not go in or out without depressing the center button. If you […]

    • Sale!

      ECHO is the newest addition to the MISSION Family. ECHO is a no-nonsense wakeshaper that features drop-the-handle wave performance similar to solid panel wedge-style shapers. Its compact footprint fits in smaller spaces than other wedge-style shapers while delivering the wave performance you need at the price you want.

      ECHO wakeshaper features:

      • Made with cross-linked, closed-cell foam (just like our SENTRY Fenders)
      • Easily attaches to your boat with our proprietary HyLoft™ suction cups
      • Switch sides in seconds for regular or goofy wakesurfers
      • One-year warranty
      • Patent pending & proudly made in the USA
    • Sale!

      This Barefoot International B202 Universal Boom and B107 Combo are meant for a mid-engine direct drive boat with a windshield that goes less than 8 inches past the ski pylon. The B110 boom extension is for getting kids out of the <a href=”https://www.thefootersedge.com/chine-spray/” rel=”noopener” target=”_blank”>chine spray</a>. The B107 Height adjuster is optional but is good […]

    • Sale!

      This Barefoot International B200 Deluxe Straight Boom Ultimate Setup is meant for a mid-engine direct drive boat with a windshield that goes less than 8 inches past the ski pylon. There are several Boom accessories that can be added to our boom that will make your family waterskiing experiences even more amazing. The B110 boom […]

    • Sale!

      The Barefoot International 10040 Bolt B is one of the bolts used to build the w2923 Barefoot International Pro X Series Wakeboard Tower. It is common after many years of use for the Barefoot International 10040 Bolt B to get loose so that is why we recommend a yearly inspection of your bolts as proper […]

    • Sale!

      The Barefoot International 10037 Bolt G is one of the bolts used to build the w2923 Barefoot International Pro X Series Wakeboard Tower. It is common after many years of use for the Barefoot International 10037 Bolt G to get loose so that is why we recommend a yearly inspection of your bolts as proper […]

    • Sale!

      The 70125-A-B Larger Clamp Tower Boom SUPPORT CLAMPS ON Tower are tower boom clamps for the w209 Tower boom that attaches to the TOWER. These clamps connect the tower to the adjustable support arms. You can review the 70125-A-B Larger Clamp Tower Boom SUPPORT CLAMPS ON Tower in the Tower Boom installation pdf found at […]

    • Sale!

      The Barefoot International 10061 Shoulder Bolt for w2923 tower is a bolt that is used to connect the leg of the w2923 Pro X Series Wakeboard tower. See picture below as well as the installation pdf shown. The Barefoot International 10061 Shoulder Bolt for w2923 tower should only be ordered if you have confirmed from […]

    • Sale!

      The Barefoot International 70102 ball pin for w2923 tower is a pin that is used to connect the leg of the w2923 Pro X Series Wakeboard tower. See picture below as well as the installation pdf shown. The Barefoot International 70102 ball pin should only be ordered if you have confirmed from the diagram that […]

    • Sale!

      Ok. So now you figured out your Axis surf wake is just not big enough with the factory ballast and you want to use the plug n play set up in your boat to create a MASSIVE wave. The Axis Plug N Play Ultimate Setup W025-750-AVO and W026-1 2155lbs solve this problem! Here is what […]

    • Sale!

      The 54450 and 10011 B205-bolt-thumb-screw-washer is a Barefoot International thumb screw, bolt, and washer that are needed if you have the B205 Gunnel Boom and want to bolt it to the main clamp. A picture of the 54450 and 10011 B205-bolt-thumb-screw-washer is in the description and circled. If you are not sure what you are […]

    • Sale!

      W209 Tower Boom (Fits XStar, X-80 Tower, and G3 Towers)

    • Sale!

      The Barefoot International Fly High W2934-BALL-CLAMP is just the clamps (a set of 2 clamps) at the base of the Tower Extension that clamp to your 2.25-25 inch diameter tower tubing. People who order these usually have a Super Fly High Tower Extension, but change boats or towers and the diameter of the tower tubing […]

    • Sale!

      The 70320 Bushings for Barefoot International Fly High W2927-BALL-CLAMP is the set of 4 bushings (2 for each clamp) for the 2 clamps at the base of the Tower Extension that clamp to your tower. People who order these usually have a Super Fly High Tower Extension, but change boats or towers and the diameter […]

    • Sale!

      The Fly High W719x2 W711 W709x2 Wakeshaper Ultimate Surf Setup is Guaranteed to allow you to throw the handle on your first ride. This Fly High W719x2 W711 W709x2 Wakeshaper Ultimate Surf Setup allows you to surf your boat evenly and switch surf sides in 1-2 minutes. This setup also has no exposed sacs which […]

    • Sale!

      This Barefoot International B204V Driver Side and B110 Boom Extension is meant for a Vdrive boat with a rear pylon in front of the engine and behind the rear seat. This pylon must be a reinforced ski pylon. If you are not sure for any reason, contact Mike Seipel at [email protected] The B110 boom extension […]

    • Sale!

      The 51800-L Barefoot International Carabiner is just the carabiner (2 needed) that is used with the strap to the tower that the rear cable for the Tower Extension clamps to your tower. This is also the same carabiner used for any Barefoot International boom or Fly High. The 51800-L Barefoot International Carabiner is only the […]

    • Sale!

      The 70326 Barefoot International D-ring strap for Support Cable for Tower Extension is just the D-ring that is used with the strap to the tower that the rear cable for the Tower Extension clamps to your tower. The 70326 Barefoot International D-ring strap for Support Cable for Tower Extension is only the D-ring for the […]

    • Sale!

      The 70407 Barefoot International Support Cable for Tower Extension is just the rear cable for the Tower Extension that clamps to your tower. The 70407 Barefoot International Support Cable is only the supprt cable for the new Barefoot International Pro X Series Tower Extension Super Fly High (patented) is the most extreme new product to […]

    • Sale!

      Fly High 51011 CLEAR REINFORCED KINK-PROOF TIGER HOSE is the premium wakeboard ballast hose that features an internal reinforcing coil to minimize kinking, crushing and collapsing ALL 51011 CLEAR REINFORCED KINK-PROOF TIGER HOSE IS SOLD BY THE FOOTThe highest quality ballast hose we could find, this PVC hose with rigid spiral reinforcement remains unkinked around […]

    • Sale!

      Bring your Jabsco Ballast King Reversible Pump back to life with the purple 52402 JABSCO BALLAST KING IMPELLER. The Jabsco King fittings come pre-lubed from the factory. Also, there is no O-Ring supplied. They are in individually sealed packages. This purple 52402 JABSCO BALLAST KING IMPELLER is the replacement impeller for Jabsco’s Ballast King Reversible […]

    • Sale!

      The Fly High 52403 JABSCO METAL BALLAST PUPPY IMPELLER has all the essentials to service the Jabsco Ballast Puppy Pump in your boat This complete service kit includes everything needed to keep your Jabsco Ballast Puppy Pump properly working. Included: -Impeller -O Ring -Front Cover Screws -Bushing Hand Crafted Quality Made in Milwaukee FATSAC ballast […]