• Sale!

    The Barefoot International 10040 Bolt B is one of the bolts used to build the w2923 Barefoot International Pro X Series Wakeboard Tower. It is common after many years of use for the Barefoot International 10040 Bolt B to get loose so that is why we recommend a yearly inspection of your bolts as proper […]

  • Sale!

    The Barefoot International 10037 Bolt G is one of the bolts used to build the w2923 Barefoot International Pro X Series Wakeboard Tower. It is common after many years of use for the Barefoot International 10037 Bolt G to get loose so that is why we recommend a yearly inspection of your bolts as proper […]

  • Sale!

    The 70125-A-B Larger Clamp Tower Boom SUPPORT CLAMPS ON Tower are tower boom clamps for the w209 Tower boom that attaches to the TOWER. These clamps connect the tower to the adjustable support arms. You can review the 70125-A-B Larger Clamp Tower Boom SUPPORT CLAMPS ON Tower in the Tower Boom installation pdf found at […]

  • Sale!

    The Barefoot International 10143 Shoulder Bolt for w2923 tower is a bolt that is used to connect the leg of the w2923 Pro X Series Wakeboard tower. See picture below as well as the installation pdf shown. The Barefoot International 10143 Shoulder Bolt for w2923 tower should only be ordered if you have confirmed from […]

  • Sale!

    The Barefoot International 70102 ball pin for w2923 tower is a pin that is used to connect the leg of the w2923 Pro X Series Wakeboard tower. See picture below as well as the installation pdf shown. The Barefoot International 70102 ball pin should only be ordered if you have confirmed from the diagram that […]

  • Sale!

    Ok. So now you figured out your Axis surf wake is just not big enough with the factory ballast and you want to use the plug n play set up in your boat to create a MASSIVE wave. The Axis Plug N Play Ultimate Setup W025-750-AVO and W026-1 2155lbs solve this problem! Here is what […]

  • Sale!

    The 54450 and 10011 B205-bolt-thumb-screw-washer is a Barefoot International thumb screw, bolt, and washer that are needed if you have the B205 Gunnel Boom and want to bolt it to the main clamp. A picture of the 54450 and 10011 B205-bolt-thumb-screw-washer is in the description and circled. If you are not sure what you are […]

  • Sale!

    W209 Tower Boom (Fits XStar, X-80 Tower, and G3 Towers)

  • Sale!

    The Barefoot International Fly High W2934-BALL-CLAMP is just the clamps (a set of 2 clamps) at the base of the Tower Extension that clamp to your 2.25-25 inch diameter tower tubing. People who order these usually have a Super Fly High Tower Extension, but change boats or towers and the diameter of the tower tubing […]

  • Sale!

    The 70320 Bushings for Barefoot International Fly High W2927-BALL-CLAMP is the set of 4 bushings (2 for each clamp) for the 2 clamps at the base of the Tower Extension that clamp to your tower. People who order these usually have a Super Fly High Tower Extension, but change boats or towers and the diameter […]

  • Sale!

    The Fly High W719x2 W711 W709x2 Wakeshaper Ultimate Surf Setup is Guaranteed to allow you to throw the handle on your first ride. This Fly High W719x2 W711 W709x2 Wakeshaper Ultimate Surf Setup allows you to surf your boat evenly and switch surf sides in 1-2 minutes. This setup also has no exposed sacs which […]

  • Sale!

    This Barefoot International B204V Driver Side and B110 Boom Extension is meant for a Vdrive boat with a rear pylon in front of the engine and behind the rear seat. This pylon must be a reinforced ski pylon. If you are not sure for any reason, contact Mike Seipel at support@barefootinternational.com. The B110 boom extension […]