MasterCraft X-Star Additional Ballast System - part# 558031

(also will work in all other MasterCraft V-Drives with Jabsco pumps in factory ballast)

weight: 2500 lbs. / 1135 kg.

Insider Tip: One of the awesome things about Fat Sacs™ is that It Doesn't Matter if they are the same size and shape as the compartment or space they are going in because they will conform.

If you want to get the *maximum potential weight* out of a space or compartment, it is best to get a Fat Sac™ that is at least as big or bigger than the space or compartment that it is going into, so it can fill up the whole area.

Some people even get Fat Sacs™ big enough to push up the seat cushions when no one is sitting in them *to make the wake even bigger*!

Ride the same wake as the pros. We worked with the engineers at MasterCraft to design this system so you know that it meets their high standards of quality. This package is designed to be installed on top of the factory ballast system using the same pumps and switches that are already there . Over 2500 lbs. additional ballast... Enough said.

If you want these same Fat Sacs™ ONLY (without anything else) you can order the same four custom X-Star Fat Sacs™ by ordering part # W715.

You can order the custom X-Star Rear V-Drive Compartment Fat Sacs™ individually by ordering

part# W715-rearsac

You can order the custom X-Star Front Open Bow Fat Sacs™ (under seats) individually by ordering

part# W715-frontsac

NOTE: MUST PURCHASE FITTINGS SEPERATELY WITH PART# W715,
W715-rearsac, W715-frontsac

Click here for more info.

PART# 558031	2	Custom X-Star Rear V-Drive Compartment Fat Sac™ dimensions- 40 x 22 x 22 - 800-850 lbs . 386 kg.
	2	Custom X-Star Front Open Bow Fat Sac™(under seats) dimensions- 44 x 22 x 6 - 400-450lbs / 204 kg
	3	Custom Distribution Flow Valve
	1	50' of 1" reinforced black bilge hose
	3	Check Valve T-Assembly for venting
	30	hose clamp
	all	custom fittings (all pre installed with PVC cement)
Regular Price $1669.99 Today $1249.99
		Very Important!!! : When you purchase the MasterCraft X-Star Additional Ballast System - part# 558031, you will receive the exact same package that we send into the MasterCraft factory that they put in their boats used to pull the Pro Tour. When MasterCraft installs this system in the boat at the factory, the boat is not completely put together. We found out that after the boat is put together, it takes an additional 20 feet of 1" black reinforced bilge hose (part# 558031-black hose) that you can buy from us.
Part# (558031- black hose)		20 feet of 1" black reinforced bilge hose
Regular Price $5.20 Today $2.56
Part# (558031- control system)		***Attention!!!. These Jabsco Timer Boxes are only needed in 2007 and early 2008 Master Craft Ballast Systems. They will replace the Jabsco Timer Boxes that are in the boat.*** These Jabsco Timer Boxes will allow you to add up to 20 minutes to them in order to fill the additional ballast system. You will need One per pump which is a total of 3 for the Master Craft Ballast Systems. Jabsco Timer Box Instructions Click Here
Regular Price $199.99/ea Today $99.99/ea
PART# W715	2	Custom X-Star Rear V-Drive Compartment Fat Sac™ dimensions- 40 x 22 x 22 - 800-850 lbs / 386 kg.
	2	Custom X-Star Front Open Bow Fat Sac™ (under seats) dimensions- 44 x 22 x 6 - 400-450lbs / 204 kg.
Regular Price $799.99 Today $699.99
Part# W715-rearsac	1	Custom X-Star Rear V-Drive Compartment Fat Sac™ dimensions- 40 x 22 x 22 - 800-850 lbs / 386 kg.
Regular Price $349.99 Today $249.99
Part# W715-frontsac	1	Custom X-Star Front Open Bow Sac (under seats) Fat Sac™ dimensions- 44 x 22 x 6 - 400-450lbs / 204 kg.
Regular Price $299.99 Today $199.99

Download the MasterCraft X-Star additional ballast system directions